1.1 Product Application Instructions

1.1.1 Temperature range for use: -30 ℃ to+100 ℃ (including heating of inductors)

1.1.2 This product is suitable for general electronic products such as household electronic products, communication products, and measurement products.

1.1.3 If it is necessary to use products that have a significant impact on life and property, such as aviation equipment, medical devices, disaster prevention equipment, etc., it is necessary to contact the sales personnel, obtain approval, and meet the relevant usage conditions. Otherwise, all losses caused are not related to our company.

1.1.4 The specifications and parameters in this product introduction book are for reference only. Please refer to the actual product sample for details. Thank you for your attention.

Please refer to the relevant technical guidelines for the welding requirements of product 1.1.1.1.5.

If you have any difficulties or questions regarding the use of the product, please contact our sales personnel.

1.2 Precautions for Product Use and Storage

1.2.1 The product should be stored in a ventilated, non direct sunlight environment, and should not be stored in high temperature, high humidity, dusty, or chemically corrosive environments.

1.2.2 Products should be neatly stored and not stacked in a disorderly manner or collided with each other.

1.2.3 The grease on the hands can affect the welding performance of the product. Please do not directly touch the welding terminals with your hands.

1.2.4 Please do not use organic solvents to clean inductors. If cleaning is necessary, please contact our sales personnel for professional guidance.

1.2.5 When automatic SMT products are changed to manual soldering, attention should be paid to the handling method.

1.2.6 Our company's product specifications and related materials are for reference only. Please contact our sales personnel during actual use to obtain sample installations for approval testing.

1.2.7 Excessive bending and collision of terminals can cause product breakage, please pay attention to storage and retrieval.

1.2.8 When using high-voltage inductors, the design of the circuit board needs to separate the relevant electronic semiconductor components from the inductor

More than millimeters.

1.2.9 When the product's winding is exposed, please do not touch the exposed area.

1.2.10 Environmental temperature range for storage: -40 ℃ to+100 ℃ (in the state of individual inductors).

Dongguan Xiangru Electronics Co., Ltd. Official website: www.xiangrudz.com

If you need to load this article, please indicate the source link: www.xiangrudz.com